Alphasonik PMA Series High Current Car Audio Amplifiers

This series of amplifiers is specifically designed to deliver 1-ohm mono loads, ideal for powering multiple voice coils in parallel or for running 4 - Ohm loads where maximum dampining and minimum distortion is desired. Also included are the Remote Bass Boost Control and Digital Volt Meter.



General Features:

  • Solid Brass Nickel-Plated Terminal Blocks - This feature allows for better conduction of electricity and improved current flow. Using this type of metal also protects against corrosion.
  • Remote Bass Boost Control - Install this remote knob anywhere and adjust the low - end frequencies on the fly.
  • Remote Digital Volt Meter - This meter ensures that the amplifier maintains the proper amount of voltage during operation.
  • Cooling Fan(s) - To ensure smooth and efficient operation, special cooling fans improve heat dissipation to keep the amplifier's temperature at a suitable level.
  • Bridgeable
  • Tiffany - Style RCA Jacks
  • 1 - Ohm Stable
  • Hour Meter
  • Onboard Crossover
  • Subsonic Filter
  • Bass Boost
  • 4 - way Protection Circuitry
  • Beveled Clear Acrylic Protective Cover
  • Parallel Line - Out RCA Jacks
  • MOSFET High - Speed Switching Power Supply
PMA640HCE 4-Channel High Current Amplifier:Power Handling:
  • 160W RMS x 4 @ 4-Ohms Stereo
  • 290W RMS x 4 @ 2-Ohms Stereo
  • 480W RMS x 4 @ 1-Ohms Stereo
  • 500W x 2 @ 4-Ohms Mono
  • 825W x 2 @ 2-Ohms Mono
  • 960W x 2 @ 1-Ohm Mono
PMA1000HCE 2-Channel High Current Amplifier:Power Handling:
  • 500W RMS x 2 @ 4-Ohms Stereo
  • 900W RMS x 2 @ 2-Ohms Stereo
  • 1500W RMS x 2 @ 1-Ohm Stereo
  • 1575W x 1 @ 4-Ohms Mono
  • 2500W x 1 @ 2-Ohms Mono
  • 3000W x 1 @ 1-Ohm Mono
PMA1000DE Class D Mono Block Amplifier:Power Handling:
  • 1000W x 1 @ 4-Ohms Mono
  • 1500W x 1 @ 2-Ohms Mono
  • 2060W x 1 @ 1-Ohm Mono
PMA1000DE General Features:
  • Class D Circuitry - This technology produces a more stable and efficient power output. Without wasting excess power that turns into heat, Class D Circuitry produces less energy loss, requiring a smaller heat sink and making the entire amplifier smaller.
  • 1-ohm Stable - All PMA Class D and HCE Series Amplifiers are 1-ohm stable, meaning they allow for the use of low impedance speakers while still delivering high amounts of power.
  • Linkable Amplifiers - Having the ability to link two of the same amplifiers together combining both output channels into one. This gives way to double the efficiency.
  • Tiffany-Style RCA Jacks - Unlike other RCA jacks, these are made of only one piece and are hard-mounted directly to the amp's chassis, eliminating broken, pulled-off or pushed-in RCA plugs.
  • Remote Bass Boost Control
  • Remote Digital Volt Meter
  • Hour Meter
  • Solid Brass Nickel-Plated Terminal Blocks
  • 4-Way Protection Circuitry
  • Beveled Clear Acrylic Protective Cover
  • Parallel Line-Out RCA Jacks
  • MOSFET High-Speed Switching Power Supply

Comments are closed