Polk Audio PADB1224DVC db1240 Subs & PA1200.1 Amp Bundle

PADB1224DVC High Performance Package with Two db1240 Subwoofers and a PA1200.1 High Performance Amplifier db1240 12" 720W 4-Ohm db Series Car Subwoofer Driver Power Handling.

The Polk Audio db1240 presents to you it's trademark brand performance without emptying your wallet. You get a 12" that outputs 720W Peak Power Handling subwoofer that boasts a rigid polypropylene cone and durable Santoprene surround built to handle big power over the long run.

Paired with this bundle is the PA1200.1 car audio amplifier which is a standard monoblock amp that delivers up to 1,200W RMS and handles loads down to 1 ohm without any problems that in turn gives you a more flexible subwoofer setup.




  • 12" Single voil subwoofers optimized for high performance in virtually any enclosure type: sealed, vented and band pass.
  • Wrap-around Rubber Gasket seals the sub in your enclosure for airtight performance.
  • State-of-the-art laser-based Klippel measurement technology perfectly centers the subwoofer's voice coil in the magnetic field, improving X-max and BL linearity, and the sub's micro and macro dynamics, for deep, precise, bass!
  • Black Matt-finish Composite Cones are unbelievably stiff for real gut-pounding bass.
  • Injection molded ABS dust cap also stiffens the cone to suppress unwanted resonance for incredible low distortion, high impact bass response.
  • Big beefy magnet structure and motor assembly for high output bass with tight control.
  • Durable Butyl Rubber Surround for consistent, reliable performance.
  • Four-layer vented voice coil runs cool while your music stays hot.
  • Vented pole piece for higher efficiency and ultra-high power handling.
  • Fast-On wire terminals for quick, secure hookups.
  • Monoblock amplifier for subwoofer use and particularly ideal for the SR Series.
  • 1200 watts x 1 (1 ohm), 800 watts x 1 (2 ohm) and 400 watts x 1 (4 ohm) continuous power. CEA-2006 Compliant specifications for true, accurate power ratings.
  • 2400 watts x 1 (1 ohm) dynamic power.
  • 1 ohm stable design can drive even the most demanding subwoofers.
  • Super Efficient Class D Pulse Width Modulation amplifier design. Draws less power and runs cooler so you won't heat up the inside of your vehicle or make the headlights dim.
  • High-speed MOSFET switching power supply and high current Bipolar Output Transistors pump maximum voltage and high current to your speakers or subwoofers.
  • Double Layer Fiberglass Epoxy Printed Circuit Boards for more rigidity, less shrinkage and a smaller overall amp footprint.
  • 6-Way Smart System Protection (SSP) circuits

Pioneer TSA-1302C 5-1/4" 180W Component Speaker System

The TSA-1302C 5.25" Component Speakers from Pioneer replaces the TSC-1353 as the newest model and brings you 180W Peak Power Handling with 2 tweeters and two external crossovers. Standard injection-molded carbon graphite polypropylene with aramid woofers.




  • component speaker system includes two 5-1/4" woofers, 2 tweeters, two external crossovers, and two woofer grilles
  • injection-molded carbon graphite polypropylene with Aramid woofers
  • butyl rubber surrounds
  • 7/8" Tetron soft dome tweeters
  • 2-way external crossovers
  • 4-ohm impedance
  • 2-35 watts RMS power range (180 watts peak)
  • frequency response: 36-30,000 Hz
  • sensitivity: 90 dB
  • depth: 1-15/16"
  • 6"x8"/6"x8"C mounting bracket included

Sony CDX-GT540UI In-Dash CD/MP3 Receiver w/ Front USB/Aux Inputs

The CDX-GT540UI In-Dash CD/MP3 Receiver from Sony features a white dot-matrix CD text display for clear viewing of music track text with MP3 ID3 Tag Display showing Title, Artist, and Album. Compatible playback of CD/CDR/CDRW and digital MP3 and WMA formats as well. This unit also has a tuner with 18FM/12AM presets, a Radio Data System (RDS) that displays radio broadcast information such as artist, title, and album.

Of course with Sony receivers come standard with QuickBrowZer that lets you search and select songs by category, Jump Mode that lets you fast forward through a music category in 10% increments, and Zappin feature that plays music in 6, 9, or 30 second clips until you find what your looking for. The CDX-GT540UI also has options for expandability which include 2 sets of 2V preamp outputs, front, rear/subwoofer, Sirius or XM Satellite Radio ready for uninterupted commercial free music, talk, sports, and news channels.




  • CD Text Display : CD and MP3 / WMA data displayed
  • Disc Capacity : 1
  • Illumination : Blue
  • On-Screen Clock : 12H
  • CD : CD, CD-R / CD-RW (MP3 / WMAfiles)
  • 12V Trigger Output(s) : Power antenna Amplifier turn on
  • Antenna Terminal(s) : Aerial Input Terminal
  • Audio In : Front Aux input with variable level: -8dB ~ +18dB Front USB input Sony Bus audio/controll terminal
  • Digital Audio Input(s) : -Ability to use all forms of USB devices may vary as not all devices are compatible. This unit can be connected to the following iPods. Update your iPod to the latest software before you use it. -iPod Nano 1st generation* -iPod Nano 2nd generation (aluminum) -iPod Nano 3rd generation (video) -iPod 5th generation (video)* -iPod Classic -iPod Touch -iPhone When you connect iPod Nano1st generation or iPod 5th generation, Passenger Control is not available. -This unit is compliant with MSC (Mass Storage Class) and MTP (Media Transfer Protocol) type USB devices compliant with the USB standard. -This unit cannot recognize USB devices via a USB hub. If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer.
  • Infrared Port : Wireless remote
  • RCA Audio Output(s) : Front and Rear/Sub selectable RCA pre-amp outputs
  • Tilt Range : 45°
  • Current Drain : 3 - 5 amps
  • Input Voltage : 12 V DC car battery (negative ground)
  • Output Power : 52W x4 High Power - 17 watts per channel minimum continuous average power into 4 Ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 5% total harmonic distortion.
  • Power Consumption (in Operation) : 45w
  • Color : Gun Metallic / Black
  • Remote Jack : Optional wired remote terminal
  • USB Port(s) : Front USB - Full Speed
  • Max power output : 52 watts x 4 at 4 ohms
  • Speaker Impedance : 4-8 Ohms
  • Band : AM / FM
  • CD Playback : CD, CD-R / CD-RW (MP3/WMAfiles)
  • Digital-to-Analog Converter : 24bit
  • Frequency Response : CD: 10-20,000 Hz
  • Preout Impedance : 220 ohms
  • Preout Voltage : 2 volt
  • Signal-to-Noise Ratio (dB) : CD: 120 dB
  • Station Preset(s) : 18 FM / 12 AM
  • Tone Control(s) : Low +/- 10 dB at 60 Hz Mid +/- 10 dB at 1 kHz High +/- 10dB at 10 kHz
  • Tuner Frequency Range : FM:Tuner Frequency Range(MHz): 87.5-107.9, AM:Tuner Frequency Range(kHz): 530-1710
  • Tuner Type : SSIR-EXA with RDS
  • Volume Control : Tel/Nav Attenuation Circuitry
  • Wow and Flutter : Below measurable limit
  • FM Usable Sensitivity : 10 dBf
  • Frequency Response : FM: 20-15,000 Hz
  • S/N Ratio : 70 dB (mono)
  • Selectivity : 75 dB at 400 kHz
  • Stereo Separation : 40 dB at 1 KHz
  • Dimensions (Approx.) : 178 x 50 x 179mm
  • Weight (Approx.) : 1.3Kg

Precision Power S2.65C 6-1/2" 200W Sedona Series Speaker Bundle

Here is a bundled solution that will get your system up and running in no time. The S2.65C from Precision Power includes a pair of 6-1/2" Sedona Series 2-way car component speakers as well as tweeters and crossover for a complete installation. The Sedona Series speakers output 200W of peak power and 100W RMS per speaker, and features zirconium coated, plypropylene cone woofer and rubber surround.




  • Zirconium coated, polypropylene cone woofer
  • Rubber surround
  • 1/2" Mylar bullet tweeter
  • Rubber magnet boot
  • Surface and flush-mountable tweeter
  • Zolon coated low-resonance basket
  • 4 ohms impedance
  • 1" Aluminum voice coil
  • 20oz Magnet structure
  • Top-mount depth: 2-1/4"
  • White terminal connections
  • Includes speaker grilles

Sony CDX-GT350MP In-Dash CD Receiver w/ Built-In RDS & Remote

Want a premium CD receiver but don't want to spend so much at the same time, then check out the CDX-GT350MP from Sony. Sony has designed the CDX-GT350MP with superior sound in mind in which they feature the Dynamic Reality Amp to produce a more realistic sound staging in your car which is then backed up with the True Fidelity Sound Construction that combines a heavy-duty capacitor with an advanced amp design for improved deep bass output. Of course playback compatibility are standard CD/CDR/CDRW as well as digital MP3 and WMA loaded CD's. Expansion of the GT350MP offers HD Radio tuner or Satellite radio that will enable you to enjoy commercial free music, talk, news, and sports channels.


  • CD Text Display : CD/MP3/WMA data displayed
  • Dimmer Adjust : Slectable on/off
  • Key Illumination : Blue
  • On-Screen Clock : 12H
  • Band : AM / FM
  • Digital-to-Analog Converter : 24 bit
  • Format(s) Supported : CD, CD-R / CD-RW (MP3/WMA files)1
  • Frequency Response : CD: 10-20,000 Hz
  • Preout Impedance : 220 ohms
  • Preout Voltage : 2 volt
  • S/N Ratio : Audio Power: CEA2006 S/N 80 dBA
  • Signal-to-Noise Ratio (dB) : CD: 120 dB
  • Station Preset(s) : 18 FM / 12 AM
  • Tone Control(s) : EQ3: 3 band EQ
  • Low +/- 10 dB at 60 Hz
  • Mid +/- 10 dB at 1 kHz
  • High +/- 10dB at 10 kHz
  • Tuner Frequency Range :
  • FM:Tuner Frequency Range(MHz): 87.5-107.9
  • AM:Tuner Frequency Range(kHz): 530-1710
  • Tuner Type : SSIR-EXA with RDS
  • Wow and Flutter : Below measurable limit
  • 12V Trigger Output(s) :
  • Power antenna
  • Amplifier turn on
  • Antenna Terminal(s) : AM/FM Antenna Input Terminal
  • Audio In :
  • Front Aux input with variable level: -8dB ~ +18dB
  • Rear Sony Bus audio / controll terminal
  • Infrared Port : Wireless remote
  • RCA Audio Output(s) : Front and Rear/Sub selectable RCA pre-amp outputs
  • Remote Jack : Optional wired remote input terminal

Kenwood KDC-MP445U In-Dash CD Receiver w/ Front USB/Aux Inputs

The KDC-MP445U from Kenwood is an all in one media solution for you vehicle. Media playback compatibility includes CD/CDR/CDRW including MP3 and WMA files, while the front-panel USB and auxiliary inputs offer even more audio options with connection of other portable media players such as an iPod that lets you take control from your receiver. If you're going for maximum sound quality, you'll appreciate the three sets of preamp outputs for connecting a full setup of external amps and subs. The System E's crossover offers high- and low-pass filters that you can adjust for optimal sound from your system.


  • TDF (Theft Deterrent Faceplate)
  • 14 Segment/13-Digit FL Display
  • Music Search
  • Favorite Memory
  • Rotary Encoder for Easy Operation
  • Key Illumination (Blue)
  • Manual Dimmer Function (2Step)
  • Supplied with Remote Control Unit

MB Quart Q-Series Q4.80, Q4.150, and Q1.1500D Amplifiers

New for 2010 are the Q-Series Car Audio Amplifiers from MB Quart, these are the newest generation of the Q-Series that tops the previous models. The Q4.80 outputs 480W RMS and the Q4.150 at 880W RMS, both are 4-Channel Class AB Amps while the Q1.1500D is a Mono Block that outputs 1500W. All 3 feature High Speed MOSFET Output Devices, Soft Start Turn-on, Top Mount Control, a 3-Way System Protection Circuitry, and a Full Feature Crossover Design.

Other features are Clipping Control with Pre-Clip, Soft Clip, and Full Clip Visual Indicators, Built-In System Diagnostics to help you determine any problems within the system, a Double SisdeD PCB Design making it very tough for those rough rides, a High Density split-dome convection heat sink for high amounts of heat dissipation that'll keep your amp lasting longer.


Alpine SWR-T10 and SWR-T12 Type-R Thin Car Audio Subwoofers

Introducing the new generation Type-R thin car audio subwoofers of 2010 from Alpine. These subs combines the intense lo-bass performance and ground-shaking output of the traditional Type-R subs in a thin package optimized for exteremely small enclosure. Both output 1800W peak power capacity in a 10 or 12 inch size and since these are compact, 45% depth reduction, means they have been engineered to offer more installation flexibility and application versatility to build the ideal sound system.


4 Unique Alpine Technologies that is engineered in the SWR-T10 and SWR-T12


1. Radial Vented VC Heat Sink & Airflow Management System
  • Actively manages voice coil temperatures by forcing air directly across the heat sink system.
2. FEA Optimized Dual-Sided Machined CRC Motor Structure
  • Creates a symmetrical magnetic field with evenly distributed flux density to greatly reduce distortion, while further improving power handling and output.
3. FEA Optimized Injection Molded TPE Spider with Pass-Through Gap Design
  • Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package
4. FEA Optimized HAMR Surround
  • The High-Amplitude Multi Roll Surround Design allows for extreme excursions without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene ®, the HAMR surround is a key part of the suspension system that provides accurate, distortion-free control at extreme excursions.