UPGRADE YOUR FACTORY SYSTEM WITH WĀVTECH!

Wāvtech linkD

centered image

Don’t let Wāvtech linkD’s small appearance fool you. A versatile little box with a dual personality, it is an active, high output/low impedance line output converter that is designed to work well with factory audio systems. It can also function as a high output voltage line driver that can deliver over 10V RMS of output at less than 50 ohms.

One of Wāvtech linkD’s many features is an auto turn-on via DC-offset or Audio Signal Detect. With this, the unit can be turned without the need of a remote wire and can generate a +12V output to turn on the amplifier or other aftermarket devices in your system. This makes it a great choice for upgrading an OEM audio system. It also has selectable ground isolation, locking detachable power/speaker input terminals, professional grade panel mount RCA’s and a compact aluminum chassis with detachable mounting tabs.

Wāvtech link4

centered image

The most flexible 4-channel LOC available today, Wāvtech link4 can directly accept 4-channels of input and give you 4-channels of output.  It can also accept 2-channels of input and give you 4-channels of output.  If you input 4-channels, you can sum them down to 2-channels of output and pass through another 2-channels for retained sub level control. To top it all off, it even has a  3.5mm Auxiliary Input so you can add your phone or other portable devices to the system. 

The link4 also has their “Patent Pending” Multi-Function Remote Level/Source Control that can adjust your subwoofer output level, the volume of the auxiliary source or serve as a Master Volume Control for your entire system, which is especially useful in OEM systems where speed sensitive volume dependent equalization is present. The link4 also has variable gain adjustments with clip LEDs can help the signal level under control and distortion-free. Like the linkD,the link4 also has selectable ground isolation, locking detachable power/speaker input terminals, professional grade panel mount RCA’s and a compact aluminum chassis with detachable mounting tabs.

Wāvtech link6

centered image

One of the most common aftermarket car audio systems is a front, rear and subwoofer set-up, and Wāvtech link6 is the perfect tool for the job.  It can provide front, rear and subwoofer outputs for your aftermarket amplifier/s by getting its input from your factory stereo’s front and rear speaker leads. While some factory audio systems will require summing when adding aftermarket amplifiers because no full range signal is present, the link6 combines the sum of the frequencies present, providing the full range signal amplifiers needed.

The link6 also has a multi-function remote that provides four unique configurations based on the specific application requirements of your system for added flexibility. It can work as a subwoofer level control for fine tuning the amount of bass in your system, or as a master volume control in more complex installations.

Always visit us at onlinecarstereo.com to see more Wāvtech products we offer. You can also subscribe to our newsletter to receive weekly promotions and save tons of cash.


Add comment

Loading