This series of amplifiers is specifically designed to deliver 1-ohm mono loads, ideal for powering multiple voice coils in parallel or for running 4 - Ohm loads where maximum dampining and minimum distortion is desired. Also included are the Remote Bass Boost Control and Digital Volt Meter.

General Features:

• Solid Brass Nickel-Plated Terminal Blocks - This feature allows for better conduction of electricity and improved current flow. Using this type of metal also protects against corrosion.
• Remote Bass Boost Control - Install this remote knob anywhere and adjust the low - end frequencies on the fly.
• Remote Digital Volt Meter - This meter ensures that the amplifier maintains the proper amount of voltage during operation.
• Cooling Fan(s) - To ensure smooth and efficient operation, special cooling fans improve heat dissipation to keep the amplifier's temperature at a suitable level.
• Bridgeable
• Tiffany - Style RCA Jacks
• 1 - Ohm Stable
• Hour Meter
• Onboard Crossover
• Subsonic Filter
• Bass Boost
• 4 - way Protection Circuitry
• Beveled Clear Acrylic Protective Cover
• Parallel Line - Out RCA Jacks
• MOSFET High - Speed Switching Power Supply

• 160W RMS x 4 @ 4-Ohms Stereo
• 290W RMS x 4 @ 2-Ohms Stereo
• 480W RMS x 4 @ 1-Ohms Stereo
• 500W x 2 @ 4-Ohms Mono
• 825W x 2 @ 2-Ohms Mono
• 960W x 2 @ 1-Ohm Mono

• 500W RMS x 2 @ 4-Ohms Stereo
• 900W RMS x 2 @ 2-Ohms Stereo
• 1500W RMS x 2 @ 1-Ohm Stereo
• 1575W x 1 @ 4-Ohms Mono
• 2500W x 1 @ 2-Ohms Mono
• 3000W x 1 @ 1-Ohm Mono

• 1000W x 1 @ 4-Ohms Mono
• 1500W x 1 @ 2-Ohms Mono
• 2060W x 1 @ 1-Ohm Mono

• Class D Circuitry - This technology produces a more stable and efficient power output. Without wasting excess power that turns into heat, Class D Circuitry produces less energy loss, requiring a smaller heat sink and making the entire amplifier smaller.
• 1-ohm Stable - All PMA Class D and HCE Series Amplifiers are 1-ohm stable, meaning they allow for the use of low impedance speakers while still delivering high amounts of power.
• Linkable Amplifiers - Having the ability to link two of the same amplifiers together combining both output channels into one. This gives way to double the efficiency.
• Tiffany-Style RCA Jacks - Unlike other RCA jacks, these are made of only one piece and are hard-mounted directly to the amp's chassis, eliminating broken, pulled-off or pushed-in RCA plugs.
• Remote Bass Boost Control
• Remote Digital Volt Meter
• Hour Meter
• Solid Brass Nickel-Plated Terminal Blocks
• 4-Way Protection Circuitry
• Beveled Clear Acrylic Protective Cover
• Parallel Line-Out RCA Jacks
• MOSFET High-Speed Switching Power Supply