Here's a great deal for one of our bass packages that includes a 1000W Kenwood KFC-W2513 and 1000W X500-1 Class D Monoblock Power Car Amplifier. If you're looking to upgrade your old bass system this package is a great starter system.

KFC-W2513PS General Features:

  • 300W RMS
  • 1000W Peak
  • PPC Cone with Diamond Array Pattern
  • Dual Ventilation System
  • 4 Ohm Impedance
  • 8 AWG Speaker Wire Capable
  • Double Stacked Magnet
  • Long Stroke Structure

X-500-1 General Features:

  • 300W RMS x 1 @ 4 Ohms
  • 500W RMS x 1 @ 2 Ohms
  • 1000W Max Power
  • Frequency Response: 20-200Hz
  • Sensitivity: 100 dB
  • Variable High Pass Filter
  • Variable Low Pass Filter
  • Variable Bass Boost
  • Dimensions: 9-1/4" W x 2-3/16" H x 7-9/16" D

Posted in: Amplifiers , Bundles , Car Audio , Subwoofers  Tags:

Introducing the KAC-7205/RB from Kenwood is a 500W 2-Channel Class AB Car Stereo Amplifier featuring a MOSFET power supply, LED power indicator, Preamp RCA outputs, and Built-In cooling fan. The 7205/RB also has a sturdy cast-aluminum chassis that supplies 1000-watts maximum power. Built-in high-pass and low-pass filters adjust the amplifier output.

 

 

General Features:

KAC-7205 car amplifier Power Output

  • 170W X 2 @ 4 Ohms
  • 250W X 2 @ 2 Ohms
  • 500W x 1 [Bridged] @ 4 Ohms

Amplifier General Features

  • Class A/B 2-channel (stereo) car amplifier with MOSFET power supply
  • LED power indicator
  • Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
  • Speaker impedance: 2-8 ohms (4-8 ohms bridged)
  • Bridgeable operation
  • Speaker-level inputs with signal sensing for automatic turn-on
  • Preamp RCA outputs
  • Short circuit, DC offset, overload, and thermal protection circuitry
  • Aluminum die cast heat sink
  • Built-in cooling fan
  • Gold-plated RCA level inputs
  • Gold-plated screw terminals
  • Variable low-pass filter (50-200 Hz, 24 dB/octave)
  • CEA-2006 compliant amplifier
  • Frequency response: 5-50,000 Hz
  • Dimensions: 13-3/4"L x 2-5/16"H x 9-3/8"D

Posted in: Amplifiers , Car Audio  Tags:

Cadence is proud to announce the latest release of the new "ZRS" amplifiers. With tight, accurate, heart-pounding bottom end bass, and clear, crisp highs, the Cadence ZRS series are a tough, reliable and flexible series of amplifiers! Whether you are an SPL boomer or sound quality fanatic, Cadence's mission has always been to build products that make your audio system perform at its absolute best.

We've just added the new ZRS series amplifiers on OnlineCarStereo.com as well as other top performance car audio products from Cadence.

Posted in: Amplifiers , Car Audio , New Arrivals  Tags:

The new Alpine PDX Series amplifiers are completely re-engineered for performance, sound quality, and reliability. The PDX series are for the true car audio

Ultra-Wide Frequensy Response
This super-wide, industry leading frequency range offers listeners unparallel sound quality and detail that bests even the most high-end audiophile equipment. 5Hz-100kHz for 4ch, 5Hz-400Hz for Mono (+0,-3dB), and 3Hz~100kHz (+0dB, -3dB), Mono: 3Hz~600Hz (+0dB, -3dB) for 5ch.

Unique Stacking System
The new PDX series amplifiers are 20% thinner than previous models at only 2” thick. New stacking system packs the amps closer together so there are no gaps and to save space in the trunk while directly coupling the amps heatsinks to help share cooling duties.

 


Power Management Processor
PDX amps incorporate Alpine’s new Power Management circuit. The Power Management Processor controls all aspects of amplifier performance, monitoring voltage, temperature and output to ensure uninterrupted power output for non-stop listening.

A Touch of Personalization
PDX amplifiers come with removable trim rings, allowing them to be easily custom painted to match your vehicle or personalized to anything you want. Add it as another Do-It-Yourself project, or leave it to professionals and ask an Authorized Alpine retailer/installer near you.

General Features:

  • Stackable installation design with front-panel controls
  • Variable high-pass filter on front channels (30-6000 Hz, 12 dB/oct)
  • Variable high-pass filter on rear channels (30-600 Hz, 12 dB/octave)
  • Variable low-pass filter on subwoofer channel (50-600 Hz, 24 dB/oct)
  • Variable subsonic filter on subwoofer channel (0-30 Hz, 24 dB/oct)
  • Quick-connect speaker connectors
  • Class-D amplifier design
  • MOSFET power and output stages
  • Fuse rating: 40A x 2

 


Posted in: Alpine , Amplifiers , Car Audio  Tags:

The Prime M750-1D amplifier is a 750 Watt mono high efficiency Class-D amplifier specifically designed for Marine and Powersport applications. The amplifier printed circuit board is conformal coated with a UV resistant finish that conforms to industry standard UV and Salt-Fog specifications, and the Class-D circuit topology is so efficient, it consumes much less current from your charging system over traditional Class-A/B amplifiers.

 

 

General Features:

  • UV resistant and Salt-fog marine protection
  • Pulse Width Modulated MOSFET power supply
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +18 dB bass boost at 50 Hz)
  • Soft start turn-on
  • Mono channel operation
  • Preamp RCA output to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • High-density split-dome convection heat-sink for extreme heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Variable low-pass filter (50-500 Hz, 24 dB/octave)
  • CEA-2006 compliant amplifier
  • Frequency response: 20-250 Hz

Posted in: Amplifiers  Tags:

The M700/5 is ideal for a complete audiophile-grade, subwoofer + four satellite system, and it fits comfortably in just about any boat's weather-tight compartments. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 O), while also delivering a stout 300 W of power to a subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD™ switching design.

 



The M700/5 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. With the addition of an HD-RLC remote level control (sold separately), the amplifier's subwoofer channel level or overall level can be directly controlled from a remote location.

 

General Features:

  • Unregulated MOSFET switching type power supply
  • NexD Class D Technology reduces distortion and delivers superior efficiency
  • Fully variable 12dB/octave filters with filter frequency selection controls
  • Two stereo pairs (RCA-Type Jacks)
  • 5-channel operation
  • Speaker-level (high-level) inputs
  • Pass-Through preamp RCA outputs to daisy chain multiple amps
  • Advanced Rollback Protection circuitry for advanced thermal and low-impedance protection
  • Differential inputs reduce unwanted noise
  • Speaker output connections accept up to 8 AWG wire
  • +12V and Ground connections accept up to 4 AWG wire
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Variable High-Pass Filter (50-5000 Hz, 12 dB/octave)
  • Variable Low-Pass Filter (50-500 Hz, 12 dB/octave)
  • Signal-to-Noise Ratio (Main Channels): >104 dB
  • Frequency Response (Main Channels): 12-22,000 Hz
  • Frequency Response (Subwoofer Channels): 10-1000 Hz
  • Input Range: 100mV - 4V RMS
  • Damping Factor: >150 @ 4 ohm, >75 @ 2 ohm
  • THD (Total Harmonic Distortion): <1%
  • Dimensions: 10-1/4"L x 7-1/16"W x 2-1/16"H

Posted in: Amplifiers , Car Audio  Tags:

This compact amplifier is ideal for a simple audiophile-grade, subwoofer / satellite system. With the M500/3, you can drive a pair of quality component speaker systems with plenty of clean power, while also delivering a stout 300 W to a subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD™ switching design.

The M500/3 includes a 12 dB / octave high-pass filter for its main channels, plus a variable slope low-pass filter for its subwoofer channel. Both filters offer continuously variable cutoff frequency selection from 50-500 Hz.

This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

 

 

General Features:

  • Unregulated MOSFET switching type power supply
  • NexD Class D Technology reduces distortion and delivers superior efficiency
  • Fully variable 12dB/octave filters with filter frequency selection controls
  • Two stereo pairs (RCA-Type Jacks)
  • 2-channel/Mono operation
  • Speaker-level (high-level) inputs
  • Pass-Through preamp RCA outputs to daisy chain multiple amps
  • Advanced Rollback Protection circuitry for advanced thermal and low-impedance protection
  • Differential inputs reduce unwanted noise
  • Speaker output connections accept up to 8 AWG wire
  • +12V and Ground connections accept up to 4 AWG wire
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Variable High-Pass Filter (50-500 Hz, 12 dB/octave)
  • Variable Low-Pass Filter (50-500 Hz, 12 dB/octave)
  • Signal-to-Noise Ratio (Main Channels): >104 dB
  • Signal-to-Noise Ratio (Subwoofer Channel): >87 dB
  • Frequency Response (Main Channels): 12-22,000 Hz
  • Frequency Response (Subwoofer Channel): 7-500 Hz
  • Input Range: 100mV - 4V RMS
  • Damping Factor: >120 @ 4 ohm, >60 @ 2 ohm
  • THD (Total Harmonic Distortion): <1%
  • Dimensions: 10-1/4"L x 7-1/16"W x 2-1/16"H

Posted in: Amplifiers , Car Audio , Marine  Tags:

The Punch P1000X5D is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5D is perfect for running a front/rear system and a dedicated subwoofer.

 

 

The P1000X5D 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofer(s) off the 5th channel! Known world-wide for brute power, this Class-D design offers a higher level of efficiency along with a tri-stage protection that covers thermal, over-current and short circuits.

Power Handling:

  • 75W RMS x 4 @  4 Ohms + 200W RMS x 1 @ 4 Ohms
  • 125W RMS x 4 @ 2 Ohms + 500W RMS x 1 @ 2 Ohms
  • 250W RMS x 2 [Bridged] @ 4 Ohms + 500W RMS x 1 @ 2 Ohms
General Features:
  • 0°/180° Phase Switch
  • Top mounted controls
  • 12dB/octave crossover
  • 2/4 channel switch
  • 4 Gauge power/ground terminals
  • Cast aluminum heatsink
  • Infrasonic filter
  • MOSFET output stage
  • MOSFET power supply
  • Top Mounted LED Indicators

 

 


Posted in: Amplifiers  Tags:

Calendar

«  August 2014  »
MoTuWeThFrSaSu
28293031123
45678910
11121314151617
18192021222324
25262728293031
1234567
View posts in large calendar

Recent Comments

Google Ads